R-Bak-detail
R/bak® PSA 2 LT, MT or HT
R/bak® Cushion Mounting Materials
R/bak® PSA 2 LT, MT or HT
R/bak PSA line of plate mounting tapes combines our cushion mounting materials with rubber based adhesives in a variety of thicknesses.
PSA LT – Low-Tack Adhesive
Available thicknesses of .020-.080 in (.51 mm – 2.03 mm)
Ideal for use on photopolymer plates
Allows for easy re-positioning and removal from the cushion
Suited for wide web applications
PSA MT – Medium-Tack Adhesive
Available thicknesses of .020-.060 in (.51 mm – 1.52 mm)
Firmly grips photopolymer plates but allows easy demount
Suited for smaller diameter cylinders with plates exhibiting edge lift
PSA HT – High-Tack Adhesive
Available thicknesses of .020-.080 in (.51 mm – 2.03 mm)
Aggressive adhesive for mounting rubber or thick, hard photopolymer plates
Mounting to cylinder will result in difficult demount or delamination
PSA LT – Low-Tack Adhesive
Available thicknesses of .020-.080 in (.51 mm – 2.03 mm)
Ideal for use on photopolymer plates
Allows for easy re-positioning and removal from the cushion
Suited for wide web applications
PSA MT – Medium-Tack Adhesive
Available thicknesses of .020-.060 in (.51 mm – 1.52 mm)
Firmly grips photopolymer plates but allows easy demount
Suited for smaller diameter cylinders with plates exhibiting edge lift
PSA HT – High-Tack Adhesive
Available thicknesses of .020-.080 in (.51 mm – 2.03 mm)
Aggressive adhesive for mounting rubber or thick, hard photopolymer plates
Mounting to cylinder will result in difficult demount or delamination
List of Services
-
R/bak® SA 2300 Thin Tape Medium combination plate mounting tape ideal for general purpose applicationsR/bak® SA 2300 Thin Tape
-
R/bak® U1A Combined with single sided acrylic adhesive technologyR/bak® U1A
-
R/bak® SS Soft modulus cushion for use in fine line multi-color process printing on corrugated substratesR/bak® SS
-
R/bak® U SR 2500-Firmer open cell urethane for solid and line printing workR/bak® U
-
R/bak® SA 2500 Thin Tape Firm combination plate mounting tape ideal for line and solid applicationsR/bak® SA 2500 Thin Tape
-
R/bak® PSA 2 LT, MT or HT Compressible Printing Materials for use with Photopolymer PlatesR/bak® PSA 2 LT, MT or HT
Adhesive on both plate and cylinder side
Available in three adhesive levels: Low Tack (LT), Medium Tack (MT) and High Tack (HT)
-
R/bak® SF General purpose cushion for use in solids, line and process printing on corrugated substratesR/bak® SF
-
R/bak® SA 2100 Thin Tape Soft Combination Plate Mounting Tape ideal for screen and process applicationsR/bak® SA 2100 Thin Tape
-
R/bak® SR 2000 Series SR 2100-Soft open cell urethane for demanding process and combination applicationsR/bak® SR 2000 Series
For direct printing on combined board and use on the newest multi-color presses,
as well as older presses, R/bak eliminates many problems while improving print quality and productivity. Used for film, label and corrugated printing, R/bak materials improve registration and ink transfer, reduce dot gain and gear banding, decrease plate deformation and allow the use of finer screens for finer line work. R/bak materials also reduce pressure and absorb shock for flexographic printing plates.
Benefits
- Longer plate and cushion life
- Higher print quality
- Consistent compressibility performance in a compressible plate mounting system
- New Paragraph
Let's grow your business!
Our skilled professionals are here to help you every step of the way. Advance your business to another level.
CONTACT US
